Lloyd PU Panel System offers on step solution for Thermal Insulation of Roofing & Cladding of Buildings and for construction of cold rooms.
Lloyd PU Panels System comprises of Pre-fabrication sandwich panels with CFC free Polyurethane Foam at a density of 40+/- 2 kg/cu.m as a core and with profiled sheeting / plain ribbed sheeting made out of Galvanized / Galvalume steel as facing on both sides. Lloyd PU Panels come with standard Tongue and Groove Joints for Cold Rooms and Roofing panels and with Concealed fixing system arrangement for Cladding of Buildings.
Lloyd PU Panel are manufactured in the most Modern Continuous panel making line and can be supplied in strengths upto 12m (limited due to restriction in transportation). Lloyd PU Panels are available in a standard width of 1m and in various thickness to suit the Industry requirements.
Typical Installation Procedure
LloydPU Roofing Panels are fixed on to the purlins / subgirts with joints over lapped and fasteners using hot-dipped zinc coated self drilling hexagonal fasteners of suitable length.
The edges and connection locations shall be covered with suitable capping and flashing profiles.
LloydPu Wall Panels are fixed on to the runners / Subgirts or directly on to the columns with joints over lapped and shall be fastened using hot dipped zinc coated self drilling hexagonal fasteners of suitable length. LloydPU Wall Panels shall be either installed horizontally or vertically to suit customer requirements.
The edges and connection location shall be covered with suitable capping and flashing profiles.
LloydPU Panels are installed as ceilings with necessary support beams including rods with turn buckle height adjustment system and flashings.
The joints of the ceilings panels are provided with PU Insulation and provided with flashing on top and bottom. The profiled bottom flashing is provided with cushioning layer of PU to avoid direct conduction of heat.